$56.14
Out of Stock until approximately 11/29/2024.
Replacement gas spring for the APSOvib 12.2162.8025 250 Newton. Mounting part tube: The eye has a thickness of 5mm and a hole diameter of 8.1mm. Mounting part rod : The eye has a thickness of 10mm and a hole diameter of 8.1mm. Brand: HAHN, a Stabilus company.
Please note:
Mounting part rod : The thickness of the eye of this replacement is 10mm instead of 5mm.
View this gas spring in our configurator. This gas spring is also known as AP12.2162.8025.
The diameter of the cylinder of this gas spring is 19 mm. The cross section of the rod is 8 mm. The stroke (the retracting part) has a length of 220 mm. The total length of this gas strut is 528 mm. Keep in mind that this is the length between the centers of the mounting parts. The length from thread to thread (exlcuding the mounting parts) is 485 millimeter. The force of this replacement is 250 Newton. This gas spring can replace a APSOvib gas spring, but is not an orignal APSOvib one. This gas spring was produced by Stabilus subsidiary HAHN. The force (250 N) and dimensions are almost identical to the original.
