$41.08
Replacement gas spring for the APSOvib 12.2162.5015 150 Newton. Mounting part tube: The eye has a thickness of 5mm and a hole diameter of 8.1mm. Mounting part rod : The eye has a thickness of 10mm and a hole diameter of 8.1mm. Brand: HAHN, a Stabilus company.
Please note:
Mounting part rod : The thickness of the eye of this replacement is 10mm instead of 5mm.
View this gas spring in our configurator. This gas spring is also known as AP12.2162.5015.
The diameter of the cylinder of this gas spring is 19 millimeters. The rod has a diameter of 8 mm. The stroke (the retracting part) has a length of 160 mm. The total length of this replacement is exactly 408 mm. Attention: this is the length between the centers of the mounting parts. The length from thread to thread (wihout mounting parts) is 365 mm. This replacement gas spring has a force of 150 Newton. This is not an original gas spring produced by APSOvib, but it can replace a APSOvib gas spring. This is a HAHN gas spring. The gas spring can be used without problems as a replacement, because the dimensions and force close to equal.
